Hot dip galvanized welded roll mesh machine
Basic Info
Model No.: DP-DNW
Product Description
Machine Description
Hot dip galvanized welded roll mesh machine
Welded Roll Mesh Welding Machine, also caleed electric welded mesh machine,
used to make construction mesh, wall mesh, animal cage, mining etc.
Machine image
Welding electrodes Main motor&reducer
Side cutters Welding transformer
Machine advantage
1. Both of the longitude wire and cross wire are fed from wire coils automatically
2. The raw material is suitable for low-carbon steel wire (black wire) and galvanized wire.
3. The middle cutter and sider cutters can be adjusted randomly to make two mesh rolls at same time.
4. We use Schneider electric components, Delta inverter in the electric control cabinet.
5. The welding transformers have 8 degrees and can be adjusted for different wire diameters.
6. The welding time and welding current can be adjusted on the control panel to adjust the welding degree.
7. The mesh roll length can be set by counter switch on the control panel.
8. We will use the best quality main motor&reducer, it will be equipped with inverter.
9. We also accept any special orders from clients.
Technical Datas
Type | DP-DNW-2 | DP-DNW-3 |
Wire diameter | 0.65-1.8mm/0.8-2mm/0.65-2mm | 1.0-2.2mm/1.2-2.5mm |
Aperture/pitch | 1/2", 1", 2" 12.5, 25, 50mm | 1", 2", 3", 4" 25, 50, 75, 100mm |
Mesh width | Max.1.2m,1.5m, 2m | Max.1.2m, 1.5m, 2m, 2.5m |
Motor | 3kw; 4kw | 4kw; 5.5kw, 7.5kw |
Welding speed | Max.120-180 rows/min | Max.80-120 rows/min |
Transformer | 60kva*4;60kva*5, 60kva*7 | 70kva/80kva*5/6/7/8 |
Weight | 2T, 2.5T | 2T, 2.5T, 3T, 3.5T |
Auxiliary Equipment
1. Mesh repairing table, 1 set 2. Mesh repairing machine, 1 set
3. Wire rolling machine, 1 set 4.Bobbin stand-off with rollers, 1 set
Finished Mesh
Factor Image
Contact Info
Product Categories : Roll Mesh Welding Machine > 3-6mm Roll Mesh Welding Machine
